Buying Guides
Changeover Switch or Automatic Transfer Switch? Which Your Generator Needs
· 9 min read · Energy Links Ghana
Both exist to guarantee one thing: that your generator supply and the grid supply are never live on your wiring at the same time. Everything else — cost, convenience, how fast the lights come back — is secondary to that single safety function, and it is the reason you cannot simply wire a generator into a socket and hope.
The choice between them comes down to a question that has nothing to do with electricity: when the power goes, is someone there who can walk to the board, and does it matter how long they take?
What both devices are actually preventing
When a generator feeds a building, the building's wiring becomes a live source. If the grid returns while the generator is still connected, two independent supplies are tied together — and current can flow backwards out of your building onto the distribution network.
That is called backfeeding, and it is dangerous in several directions at once. It can energise lines that utility staff believe are dead. It can put generator output onto a network it cannot synchronise with, which damages the generator. And it exposes your own wiring to a fault condition nothing in the house is designed for.
A changeover switch and an automatic transfer switch both solve this the same way: by making the two sources mechanically or electrically exclusive, so that reaching one position necessarily leaves the other. The switch breaks the connection to one source before it makes the connection to the other — break before make — so there is no instant where both are connected.
This is not an optional refinement. It is the entire reason the device exists, and it is why a generator installation is electrician's work rather than a weekend project.
The manual changeover switch
A changeover switch is a mechanical switch with two source positions and one load. You turn it from mains to generator and back by hand.
What is good about it
- It is the simplest and cheapest way to do the job safely. Fewer components, nothing to configure, nothing electronic to fail.
- Nothing happens without a person deciding. For some installations that is a feature — the generator never starts on its own, and nobody is surprised.
- It is easy to understand and to inspect. Anyone can see which position it is in.
- It is widely available in Ghana, in single and three phase, at a range of current ratings.
What is not
- Somebody has to be there. An outage at 2 am, or while the building is empty, means no supply until someone arrives.
- The gap is as long as it takes. Minutes, typically. Everything that cannot tolerate that is off for the duration.
- It depends on people doing it correctly, every time. Starting the generator before switching over, switching back before shutting down. Routine, until it is not.
- Load management is manual too. There is nothing to stop someone switching the whole building onto a generator sized for part of it.
The automatic transfer switch
An ATS monitors the mains supply, and when it fails, it starts the generator, waits for it to come up to speed and stabilise, and transfers the load. When the mains returns it transfers back and shuts the generator down, usually after a cooling run.
What is good about it
- It works when nobody is there. For cold storage, server rooms, security systems, clinics and anything unattended overnight, this is not a convenience — it is the point.
- The outage becomes seconds instead of minutes. Long enough that computers still restart, but short enough that most of a building barely notices.
- It removes the human error. The sequence is the same every time.
- It can enforce the rules. Delays before transfer, so a momentary dip does not start the generator; delays before transferring back, so a flickering supply does not cycle it.
What is not
- It costs more, both the device and the installation, and the generator must be one that supports remote starting.
- It is a system, not a part. Battery charger, starting battery, fuel supply and control wiring all have to be maintained, and an ATS that has never been tested is not a backup plan.
- It still does not cover the gap. Several seconds is an eternity to a computer.
The gap neither of them closes
This is the most commonly misunderstood point about generators, and it decides the shape of a lot of installations.
Even a well-configured ATS cannot transfer instantly, because the generator has to start and stabilise first. Anything that reboots when power is interrupted will reboot. Servers, network equipment, tills and card terminals all fall into this category.
This is why a properly designed installation runs a UPS in front of the generator rather than choosing between them: the UPS carries the critical load across the start and transfer, and the generator carries the duration once it is running. Our guide to UPS or inverter sets out which device solves which half of the problem, and how to choose a UPS in Ghana covers sizing the UPS for just that critical list.
There is a related detail worth knowing if you are specifying the pair. A UPS and a generator interact in ways that surprise people — a generator sized too closely to the UPS can see its voltage rise, and a UPS charger may deliberately refuse to load an unstable generator. We go through those mechanisms, with sources, in why is my UPS not charging.
Which should you choose?
Work through these.
- Will anyone reliably be present? If outages must be covered at night or in an empty building, you need an ATS. This usually settles it on its own.
- What breaks if the gap is minutes rather than seconds? Frozen stock, a clinic's equipment, a tenant's security system, a business's trading hours. If the answer is "something expensive", an ATS.
- Is the generator capable of auto-start? Many smaller portable sets are not, and retrofitting is not always sensible.
- How often does it happen? For rare outages in an occupied home, a manual changeover is a sound, honest choice and the money is better spent elsewhere.
- Is there critical equipment regardless? If yes, budget for a UPS before upgrading the transfer arrangement. The UPS covers a failure the ATS structurally cannot.
- Have you sized the generator for the load the switch will connect? A transfer switch connects whatever is on its load side. What size generator do I need covers that, and it has to be settled before the switch rating is chosen.
What Ghanaian conditions add
Three things change the calculation here relative to how this is usually written.
Frequency of operation. A transfer arrangement that operates a handful of times a year is a different duty from one operating several times a week. Contacts and mechanisms wear. Specify for the number of operations you will actually put it through, and include it in the servicing schedule rather than treating it as a fit-and-forget item.
Supply quality on the mains side. An ATS decides to transfer based on what it sees. Measurements across Accra by the Kleinman Center for Energy Policy found customers experienced an average of 219V against Ghana's 230V nominal, with voltage routinely more than 20% below nominal during the 6:00 to 10:00 pm peak. Sustained low voltage is not an outage, and an ATS set only to detect loss of supply will sit still through it while your motors suffer. Voltage protection is a separate question from transfer, and what is normal voltage in Ghana explains why it needs its own answer.
Dust and humidity. Both affect contacts, enclosures and control electronics. An outdoor or semi-outdoor installation needs an enclosure specified for it, and the inside of that enclosure needs looking at periodically.
This is an installation, not a purchase
A changeover switch bought online and fitted by someone who is not a qualified electrician is one of the genuinely dangerous outcomes in this whole category of equipment — to the people in the building, and to utility staff working on the line outside.
The device has to be correctly rated for the load, correctly positioned relative to the main switch and the building's protective devices, and correctly arranged with respect to earthing and the neutral, which depends on how the generator and the installation are configured. Those decisions are specific to your building and to Ghanaian wiring practice, and getting them wrong can defeat the protective devices you are relying on without anything appearing to be faulty.
So: specify it with someone competent, have it installed and certified by a qualified electrician, and have it tested under load before you need it. We are not going to publish a wiring diagram, because the correct arrangement is not generic.
Frequently asked questions
What is a changeover switch for a generator?
A switch that connects your building's wiring to either the mains or the generator, never both. Preventing that simultaneous connection is its purpose.
Is an ATS worth the extra cost?
If the building is ever unattended during an outage, or if minutes of delay cost you money or stock, yes. For an occupied home with infrequent outages, often not.
Can I just plug my generator into a wall socket?
No. This backfeeds your building's wiring and potentially the distribution network, and it is dangerous to you and to utility workers. It also bypasses the protective devices that are supposed to be in the path.
Single phase or three phase?
Follow the building's supply and the generator's output. Commercial premises in Ghana are commonly three phase; most homes are single phase. The switch must match, and the rating must suit the load on its load side.
Do I still need a UPS if I have an ATS?
For anything that reboots when power is interrupted, yes. Even an automatic transfer takes seconds, which is more than enough to restart a computer.
Will a transfer switch protect my appliances from bad voltage?
No. Transfer and voltage protection are different functions. A transfer switch chooses a source; a stabilizer corrects what that source delivers. See surge protector, stabilizer or UPS.
Have the whole arrangement specified together
The transfer switch, the generator rating, the critical-load UPS and the voltage protection are one system, and specifying them separately is how installations end up with a gap nobody noticed until an outage found it.
Energy Links studies how a client's building and business actually run before recommending equipment, then supplies, installs and maintains it — for rural banks, Lister Hospital, Advans Ghana, hotels, telecoms firms and a university college. We carry generators alongside UPS systems, inverters and Ortea stabilizers, and installation to the manufacturer's specification is part of what we do rather than someone else's problem.
Talk to us about your building and we will specify the transfer arrangement with the generator and the critical load together. Or see what we carry first.
Need help choosing the right equipment?
Our engineers will size it against your actual load, not a guess.
Talk to us